Maddie's Chase Inground Mounting Kit, 33-12-0094
This model-specific inground mounting kit is used to secure the Maddie's Chase UPLAY-006 playground structure at prepared below-grade footings. It is an installation accessory, not the complete play structure.
Manufacturer's revised installation schedule dated April 28, 2015 lists 20 inground footers plus matched fastening hardware. That revision supersedes the earlier 23-footer schedule for this exact kit.
Kit contents and compatibility
- Fits Maddie's Chase UPLAY-006 Natural and Playful configurations.
- Kit choice is determined by the structure and mounting method, not the color scheme.
- The 3-foot step pod on this structure must be installed inground.
Manufacturer parts schedule
| Component | Quantity | Part number |
|---|---|---|
| Inground footer | 20 | 02-07-0049 |
| 3/8 in. x 1-1/4 in. patched button-head cap screw | 60 | 33-05-0019 |
| 3/8 in. flat washer | 60 | 33-02-0002 |
| 3/8 in. hex nut | 60 | 33-01-0002 |
Mounting option comparison
| Option | Application | Important distinction |
|---|---|---|
| 33-12-0094 Inground kit | Below-grade footings | 20 inground footers in revised schedule |
| 33-12-0093 Anchor-bolt option | Concrete surface mounting | Separate mounting method; check applicable structure requirements |
| Ground-spike arrangement | On-ground mounting | Does not replace the required inground installation of the 3-foot step pod |
Installation note: Use the structure's current installation manual, local footing requirements and appropriate impact-attenuating surfacing. The drawing shows an 18-inch inground footing detail; site conditions may require engineering review.